Ethernet Doesn't Have a Valid IP Configuration in Windows 10

In the event that you've recently encountered a networking issue that says Ethernet doesn't have a valid IP configuration, then something isn't right with your Network Interface Card. The NIC is connected to your router or modem via the Ethernet cable. The issue arises in the event that it fails to obtain a valid IP address.

A valid IP address is necessary for a computer to communicate with the router and operate in the web. When a certain router or NIC gets faulty or in case of incorrect IP address designation, a blunder happens. The following solutions give a fix to various issues related to IP address configuration. Remember to follow the following steps in exact request.

Solution 1 – Reboot the system

Ethernet doesn't have a valid IP configuration blunder can be caused by Fast Startup feature. To fix this blunder, you have to follow these steps to disable Fast Startup:

1. Press Windows Key + S and enter control panel. Presently select Control Panel from the list of results.
2. Select the Power Options from Control Panel.
3. In the left pane, click on Choose what the force button does.
4. Select Change settings that are currently unavailable.
5. Uncheck the case alongside Turn on fast startup (suggested) near the bottom of the window to turn off Fast Startup.
6. Select Save changes.
7. Reboot your computer.

Control Panel won't open in Windows 10? Here are a few solutions to understand that. On the off chance that you still can't disable Fast Startup after following these steps, we prescribe this complete manual for get to the bottom of the issue.

Solution 2 – Check the Network Adapter Settings

The router attempts to designate the IP address automatically. This is the default setting, though you can still decide to assign a particular IP address.

In that case, you ought to set the IP address to automatic first and check the Internet Properties for the correct settings once it is connected. Adhere to the instructions beneath:

1. Hold the Windows Key and press R.
2. Enter ncpa.cpl in the input field and snap OK.
3. Right snap your Network Adapter in the Network Connections window and select Properties.
4. From the Ethernet Properties window, select Internet Protocol Version 4 (TCP/IPv4) and snap on Properties.
5. You will then observe the Internet Protocol Version 4 (TCP/IPv4) Properties window. Enable the following options:

• Obtain an IP Address Automatically
• Obtain DNS Server Address Automatically

Solution 3 – Restart the router and check Ethernet cable

After performing the steps above, turn off your router or modem and switch it back on after five minutes. Presently check if your PC has the valid IP configuration.

1. On the off chance that it still doesn't work, connect your router to your PC using a different Ethernet cable.
2. Otherwise, you may need to utilize a different router. On the off chance that connecting to other routers won't take care of the issue, then there is an issue with your network card.
3. Play out a factory restore to your network card, and on the off chance that it doesn't help, replace it.

Last Words

Ethernet doesn't have a valid IP configuration mistake will prevent you from accessing the Internet, but we trust that you managed to take care of this issue by using one of our solutions.